Prefabricated - Sample Flats, Farm House, Club House & Container Farm House

Construction details of M.S. Prefabricated Sample Flats (Lift & Shift type): This specification only for new fabricated.

Shell: The shell shall be fabricated from tested quality steel duly welded, comprising of base frame, peripheral structure, self draining roof, entry doors and of windows (as per requirement). The Four Top corners shall be sufficiently strengthened to facilitate transportation, lifting and placing.

Base Frame: The base frame shall be made of pressed mild steel channel section 125 x 70mm C Channel and 100x50mm I-Channel for Cross Sections.

Side and End Walls: The side and end frame shall be made out of pressed sections of suitable profiles/pillars of sufficient strength. Exterior wall shall be made up of 18 swg. MS specially corrugated sheet whereas 12mm Commercial Plywood with Wall Paper will be used for interior walls. The steel sheet shall be treated for corrosion resistant. Container Farm House Panels shall be vertically corrugated, sheet shall be continuously welded to top side and base structure so as to offer better strength to weight ratio. All gaps will be sealed at edges and at seams, bottom etc to prevent ingress of moisture.

CORNER POST
 20’ = 75x75mm Square Pipe with 3.2mm thickness
 40’ = 75x75mm Square Pipe with 3.2mm thickness

Flooring Systems: On the bottom frame 19 mm thick Marine Plywood shall be fixed by means of self taping screw and Vitrified Tiles will be install after 2” PCC.

Roof: The Prefabricated Club House has Self draining type roof shall be made out of 18 swg. M.S. sheet, adequate roof bows are to be provided. Roof shall be adequately cambered for draining of rain water. Interior paneling shall be done in 9 mm MDF board with adequate insulation.
Paint: Epoxy Zinc Phosphate primer & synthetic Epoxy paint for final 2 coats. (Corrosion free and fire proof paints)
Insulation: 50 mm thick Glass wool insulation shall be used for walls and 50 mm thick Glass wool insulation to be provided for roof.

Inner Paneling: The interior shall be aesthetically finished so as to give custom built appearance with extremely high quality workmanship. The paneling of side walls will be 12mm Commercial Plywood with Wall Paper and roof shall be of Gypsum board.

Main Entry Door: The door of Prefabricated Sample Flats shall be of external opening type made out of the same material as wall panels with door closing unit. The construction of the door shall be double skin steel construction with 40 mm thick Glass wool insulation. The peripheral edges of the door shall be sealed with double gaskets to make it waterproof & leak proof. The door interior shall be finished with same material matching with that of the bunk house interior. The door shall be provided with locking arrangement with separate handles of both sides of the door as required. Main door will be insulated and fitted with appropriate lock and power bolt.

Aluminum Windows: Aluminum powder coated windows, sliding type shall be provided, made of aluminum section, 4 mm thick, clear vision glasses are to be fitted to it.

Electrical System: The bunk house will be provided with electrical wiring suitable for 250 volt, 50 HZ single phase AC power supply. All electrical wiring shall be concealed. Suitable copper cables shall be used for lighting circuits. The Prefabricated Farm House copper cables used will be of 2.5 mm cable for lighting circuits. ISI mark and concealed in PVC conduits insulated copper wire shall be used for wiring to be done in PVC conduit with small size distribution board with MCB protection and to separate with main supply.
Electrical System: Prefabricated Club House solutions can be made available in different exclusive and attractive designs so as to provide for exclusive usage appeal. These club houses are available in various styles, finish and design options. We provide quality finished prefabricated structures for delivering lasting usage. The Prefabricated Club House features the superior perfection in terms of designs as well as construction.

The construction of Prefabricated Club House involves excellent fabrication, according to the particular aspects of the customers. The Prefabricated Club Houses goes parallel to the taste and expectations of all types of customers. The designer appearance of the product consists of a smooth surface. There are multiple eye-catching theme options for Prefabricated Club Housethat can be availed from us at comfortable prices.
Our Prefabricated Club Houses are highly respected by our patrons for attractive features, reasonable rates and high quality finishing. With the changing trends, people expect more new and unique designs in addition to maintained sturdiness and quality.
We generate deep research to find the various requirements of the people and accordingly built up the offered Prefabricated Club Houses. Material quality, quick and expert constructors, strong connections used for various joints etc. are some of our main targets while going on with the project of constructing Prefabricated Club House.
Gallery

Explore our website to find out more about business process, designs and do invite us
image Gallery
Contact Us

Landline :
(022) 64467870 / 64205773

Phone : 09224112660 / 09224147510                              09223080556 / 08976726666

Email :
enquiry@reshamcabins.com